Home   /   Products   /   Adhesion/Hardness/Flexibility Adhesion   /   Flexibility   /   Hinge-type Cylindrical Mandrel Tester
Products
 
Hinge-type Cylindrical Mandrel Tester
Hinge-type Cylindrical Mandrel Tester
It is used to assess the pliability of the paint film through the capability that the paint film deforms with bottom material and does not get damage at the specified standard conditions. It is expressed with the minimum shaft stick diameter which does not cause the paint film to crack when the test plate moves around the shaft stick of 180°within 1-3 seconds at the specific conditions in the standard. 

It confirms to ISO 1519 ,ASTM D 522,DIN 53152.
 
Main Technical Parameters:
Shaft stick diameter:2mm、3mm、4mm、5mm、6mm、8mm、10mm、12mm
Thickness of bottom material for the test plate: less than 0.3mm
Ordering information:
  BGD 561---Hinge-type Cylindrical Mandrel Tester
 
 
 
Viscosity
Original Coating Performance
Application
Color/Gloss/Thickness
Adhesion/Hardness/Flexibility
Impact/Abrasion/Tensile
Ink and Printing Instruments
Balance/Oven/Water Bath
Dispersing/Mix/Mill/Grind
Weathering Tester
Tools
Testing before Spraying
Test Substrates
Standard Expendable Items
Equipments
Petroleum Tester
 
 
General Conditions of Use | Privacy Statements | Sitemap